But today, we’re getting into the nitty gritty with the bolt pattern for every generation of the Honda Civic.
Let’s start with a quick answer:
All generations of the Honda Civic have a bolt pattern of 5×4.5 inches (5×114.3mm), a center bore of 2.52 inches (64.1mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 79.6lb-ft (108Nm) of force.
However, that certainly doesn’t tell the whole story. Below we’ve outlined the bolt pattern in more detail for each generation. We also discuss what lugs/bolts are used precisely, the exact diameter of the center bore hub, and the torque specifications of the bolts.
Finally, we also have information about each engine type’s exact tire size and rim size. You should know precisely what you can and cannot buy this way. Read on!
Wheel Fitment Specifications Per Generation
To fit a wheel properly on your Civic, you’ll need to know more aspects than just the bolt pattern. Below we’ve outlined all the factors you should be aware of for each generation of the Civic. These include: center bore diameter, wheel tightening torque, whether lug nuts or bolts are used, and the thread size of the bolts.
We also want to clarify that the below-listed specifications are the same for all models within that generation. The Civic, of course, comes in different trim levels and engine options. However, these bolt patterns, lugs used, and torque specifications do not change for other models within a generation.
Furthermore, we also listed the exact tire and rim size used with each engine option to give you a precise idea of what tires you can and cannot buy.
- Honda Civic 1.5 VTEC (180hp), has a standard tire size of 215/55R16, 215/50R17, or 235/40R18 and a standard rim size of 7Jx16 ET45, 7Jx17 ET45, or 8Jx18 ET50.
- Honda Civic 1.5 VTEC (200 hp), has a standard tire size of 235/40R18 or 235/40ZR18 and a standard rim size of 8Jx18 ET50 or 8Jx18 ET50.
- Honda Civic 2.0 iVTEC, has a standard tire size of 215/55R16 or 235/40R18 and a standard rim size of 7Jx16 ET45 or 8Jx18 ET50.
- Honda Civic 1.5 VTEC (174 hp), has a standard tire size of 215/50R17 or 235/40R18 and a standard rim size of 7Jx17 ET45 or 8Jx18 ET50.
- Honda Civic 1.5 VTEC (205 hp), has a standard tire size of 235/40ZR18 and a standard rim size of 8Jx18 ET50.
- Honda Civic 1.5 VTEC (174hp), has a standard tire size of 215/50R17 and a standard rim size of 7Jx17 ET45.
- Honda Civic 2.0 iVTEC, has a standard tire size of 215/55R16 and a standard rim size of 7Jx16 ET45.
- Honda Civic 1.5H (110 hp), has a standard tire size of 195/65R15 and a standard rim size of 6Jx15 ET45.
- Honda Civic 1.8i (110 hp), has a standard tire size of 195/65R15 and a standard rim size of 6Jx15 ET45.
- Honda Civic 1.8i (143 hp), has a standard tire size of 195/65R15 or 205/55R16 and a standard rim size of 6Jx15 ET45 or 6.5Jx16 ET45.
- Honda Civic 2.4i (205 hp), has a standard tire size of 225/40R18 and a standard rim size of 7.5Jx18 ET47.
- Honda Civic 1.3H (110 hp), has a standard tire size of 195/65R15 and a standard rim size of 6Jx15 ET45.
- Honda Civic 1.8i (140 hp), has a standard tire size of 195/65R15 or 205/55R16 and a standard rim size of 6Jx15 ET45 or 6.5Jx16 ET45.
- Honda Civic 2.0i (197 hp), has a standard tire size of 215/45R17 and a standard rim size of 7Jx17 ET45.
While this might look a little dense on paper, when you start to dive into all the wheel options everything is a lot more fun:
Retightening The Bolts
As said before, most generations of the Civic that we discussed have five lug nuts. The 5 lug nut pattern is also common across most Honda models as well. These need to be secured in a specific way when you mount the wheel to the car again. This information is stated in the owner’s manual, but we’ve gone through the effort of instructing you here. Honda advises you to bolt these nuts in the way that’s shown below. You have to follow a crisscross pattern.
You do this by tightening all the nuts with a wheel wrench first. Please make sure only to tighten them halfway; otherwise, you’ll run into problems.
In the second round, you tighten them with the wheel wrench to the appropriate lbs-ft or Nm that we’ve stated earlier. Please note that the newest generation of the Civic needs to have the bolts tightened to 79.6 lb-ft.
It’s expected that your wheel also have a center cap or cover. These need to be secured in the same pattern. Please tighten them first-hand snug with your hands. Then, use the wheel wrench to tighten them another one-quarter turn.
It’s also important to check if the lug nuts are still secured after 30 miles (48 kilometers). Please make sure they are all in place and still tightened with the proper force. If not, tighten them again and recheck. If this keeps happening, you’ll need to replace the wheel.
When Or Why To Rotate/Change Tires
Suppose you’re changing your tire. You also need to know when to change or rotate it precisely.
Let’s first talk about changing your tires. Tires usually last around 60,000 – 75,000 miles or 4-5 years. Of course, things like towing (which you can do in your Civic) will make them wear out faster but in general, they’ll need to be replaced after this period.
Sometimes this happens earlier, and therefore, it’s a good idea to keep an eye on the tread wear indicators. These are shown in the image below. These indicators show when the tires have only 1.6 mm (1/16 in) or less tread remaining.
Another occasion when you’ll need to take off your tires is when you’re rotating them. In the owner’s manual of the Civic, it’s said that this needs to happen every 7,500 miles or 12,000 kilometers. It’s advised you rotate the tires in the exact way that’s shown below. The front tires are moved to the back, and the front tires move crisscross to the front.
Wrapping things up, knowing your Honda Civic’s bolt pattern isn’t just about mechanics – it’s about ensuring your ride is smooth, safe, and stylish. Just like you need to know the right fuel for your Civic, you need to know the bolt pattern of your ride. It’s all part of keeping your vehicle on the road for the long haul.
Every Civic generation consistently sports the 5×4.5-inch bolt pattern, which simplifies things when picking new tires or rims.
So, next time you’re shopping for new wheels or tires, all you have to remember is 5×4.5 inches! Nice and easy!
Hi! My name is Stefan; I’m the owner and lead writer at TheDriverAdviser.com.
I’m an active writer on this blog myself, as well as a novice car mechanic. For the really technical stuff, I find writers with experience as a mechanic or who have studied mechanical engineering.
Read more about our fantastic team on our about page!