We’ve written extensively about the Ford Fusion and numerous questions you can have about this car. Today, we will talk about the information you need to have to select the correct new tires or rims for your Fusion.
So, what is the exact bolt pattern of a Ford Fusion, for each generation?
2013-2020 Ford Fusion have a 5×4.25 inches (5x108mm) bolt pattern, 2.5 inches (63.4mm) center bore, and five lug nuts with M12 x 1.5 thread size. 2005-2012 Fusion have a 5×4.5 inches (5×114.3mm) bolt pattern, 2.64 inches (67.1mm) center bore, and five lug nuts with M12 x 1.5 thread size. All tightened with 100lb-ft (135Nm) force.
However, that certainly doesn’t tell the whole story. We’ve talked about the bolt pattern of all Ford models, but this time we’ve outlined the Ford Fusion bolt pattern in more detail for each generation.
We also discuss what lugs/bolts are used precisely, the exact diameter of the center bore hub, and the torque specifications of the bolts.
Finally, we also have information about each engine type’s exact tire size and rim size. You should know precisely what you can and cannot buy this way. Read on!
Wheel Fitment Specifications Per Generation
To fit a wheel properly on your Fusion, you’ll need to know more aspects than just the bolt pattern. Below we’ve outlined all the factors you should be aware of for each generation of the Fusion. These include: center bore diameter, wheel tightening torque, whether lug nuts or bolts are used, and the thread size of the bolts.
We also want to clarify that the below-listed specifications are the same for all models within that generation. The Fusion, of course, comes in different trim levels and engine options. However, these bolt patterns, lugs used, and torque specifications do not change for other models within a generation.
Furthermore, we also listed the exact tire and rim size used with each engine option to give you a precise idea of what tires you can and cannot buy.
2005 – 2009
- Ford Fusion with a 2.3L I4 engine has a standard tire size of 205/60R16 and a rim size of 6.5Jx16 ET40.
- Ford Fusion with a 3.0L V6 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET44.
2010 – 2012
- Ford Fusion with a 2.5L (175hp) I4 engine has a standard tire size of 205/60R16 and a rim size of 6.5Jx16 ET40.
- Ford Fusion with a 2.5L (191hp) I4 or 3.0L V6 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET44.
- Ford Fusion with a 3.5L V6 engine has a standard tire size of 225/45R18 and a rim size of 7.5Jx18 ET44.
2013 – 2016
- Ford Fusion with a 1.5L I4 or 1.6L I4 engine has a standard tire size of 215/60R16 and a rim size of 6.5Jx16 ET50.
- Ford Fusion with a 2.0L (188hp) I4 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.0L (240hp) I4 engine has a standard tire size of 235/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.5L I4 engine has a standard tire size of 215/60R16 or 235/50R17 and a rim size of 6.5Jx16 ET50 or 7.5Jx17 ET55.
2017 – 2018
- Ford Fusion with a 1.5 Ecoboost I4 engine has a standard tire size of 215/60R16 and a rim size of 6.5Jx16 ET50.
- Ford Fusion with a 2.0 Ecoboost I4 engine has a standard tire size of 235/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.0 HEV I4 or 2.0 PHEV I4 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.5i I4 engine has a standard tire size of 215/60R16 or 235/50R17 and a rim size of 6.5Jx16 ET50 or 7.5Jx17 ET55.
- Ford Fusion with a 2.7 Ecoboost V6 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET55.
2019 – 2020
- Ford Fusion with a 1.5 Ecoboost I4 engine has a standard tire size of 215/60R16 or 235/50R17 and a rim size of 6.5Jx16 ET50 or 235/50R17.
- Ford Fusion with a 2.0 Ecoboost I4 engine has a standard tire size of 235/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.0 PHEV I4 or 2.0 iVCT I4 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET55.
- Ford Fusion with a 2.5 iVCT I4 engine has a standard tire size of 215/60R16 and a rim size of 6.5Jx16 ET50.
- Ford Fusion with a 2.7 Ecoboost V6 engine has a standard tire size of 225/50R17 and a rim size of 7.5Jx17 ET55.
Retightening The Bolts
As said before, most generations of the Fusion that we discussed have five lug nuts. These need to be secured in a specific way when you mount the wheel to the car again.
This information is stated in the owner’s manual, but we’ve gone through the effort of instructing you here. Ford advises you to bolt these nuts in the way that’s shown below. You have to follow a crisscross pattern.
You do this by tightening all the nuts with a wheel wrench first. Please make sure only to tighten them halfway; otherwise, you’ll run into problems.
In the second round, you tighten them with the wheel wrench to the appropriate lbs-ft or Nm that we’ve stated earlier. Please note that the newest generation of the Fusion needs to have the bolts tightened to 100 ft-lb.
It’s expected that your wheel also have a center cap or cover. These need to be secured in the same pattern. Please tighten them first-hand snug with your hands. Then, use the wheel wrench to tighten them another one-quarter turn.
It’s also important to check if the lug nuts are still secured after 30 miles (48 kilometers). Please make sure they are all in place and still tightened with the proper force. If not, tighten them again and recheck. If this keeps happening, you’ll need to replace the wheel.
When Or Why To Rotate/Change Tires
Suppose you’re changing your tire. You also need to know when to change or rotate it precisely. Let’s first talk about changing your tires. Tires usually last around 60,000 – 75,000 miles or 4-5 years. After this period they need to be replaced.
Sometimes this happens earlier, and therefore, it’s a good idea to keep an eye on the tread wear indicators. These are shown in the image below. These indicators show when the tires have only 1.6 mm (1/16 in) or less tread remaining.
Another occasion when you’ll need to take off your tires is when you’re rotating them. In the owner’s manual of the Fusion, it’s said that this needs to happen every 7,500 miles or 12,000 kilometers.
It’s advised you rotate the tires in the exact way that’s shown below. The front tires are moved to the back, and the front tires move crisscross to the front.
Closing Thoughts
We’ve now driven through the bolt patterns of the Ford Fusion, from the 2005-2012 models to the recent 2013-2020 versions. But as any car enthusiast knows, a vehicle is a jigsaw of complex parts, each as crucial as the next.For the Fusion, understanding the bolt pattern is just the first gear.
If you want to really rev up your Fusion knowledge then you might want to know more about the Ford Fusion Transmissions in our article. Also, if you found this deep-dive into the Fusion’s bolt pattern intriguing, then you’ll enjoy exploring the bolt pattern of a Ford Focus, or other models.
And lastly, if you’re looking to acquire a Ford car then our list of the largest Ford dealers per state could help you find the best deals and services near you. Remember, choosing the right dealer can make all the difference in your car ownership journey.
Until our next automotive adventure, keep your engines purring, your tires in good shape, and always, drive safe!
Hi! My name is Stefan; I’m the owner and lead writer at TheDriverAdviser.com.
I’m an active writer on this blog myself, as well as a novice car mechanic. For the really technical stuff, I find writers with experience as a mechanic or who have studied mechanical engineering.
Read more about our fantastic team on our about page!