Skip to Content

The Exact Bolt Pattern Of A Dodge Journey

The Exact Bolt Pattern Of A Dodge Journey

We’ve written extensively about the Dodge Journey and numerous questions you can have about this car like the Dodge Journey gas type.

Today, we will talk about the information you need to have to select the correct new tires or rims for your Journey. Specifically, we’ll take a look at the bolt pattern for each generation. Let’s start with a quick answer:

All generations of the Dodge Journey made until 2020 have a bolt pattern of  5×5 inches (5x127mm).

However, that certainly doesn’t tell the whole story. Below we’ve outlined the bolt pattern in more detail for each generation. We also discuss what lugs/bolts are used precisely, the exact diameter of the center bore hub and the torque specifications of the bolts. Finally, we also have information about each engine type’s exact tire size and rim size. You should know precisely what you can and cannot buy this way. Read on!

Also, read our main article in which we outline the bolt pattern for all Dodge models.

Wheel Fitment Specifications Per Generation

To fit a wheel properly on your Journey, you’ll need to know more aspects than just the bolt pattern. Below we’ve outlined all the factors you should be aware of for each generation of the Journey. These include: center bore diameter, wheel tightening torque, whether lug nuts or bolts are used, and the thread size of the bolts.

We also want to clarify that the below-listed specifications are the same for all models within that generation. The Journey, of course, comes in different trim levels and engine options. However, these bolt patterns, lugs used, and torque specifications do not change for other models within a generation.

Furthermore, we also listed the exact tire and rim size used with each engine option to give you a precise idea of what tires you can and cannot buy.

Center Bore, Thread Size And Wheel Torque

Before we look at the tire and rim size of each generation and the models within that generation, we want to specify other relevant information that you’ll need if you’re changing your tires. That information is as follows:

All generations of the Dodge Journey, manufactured between 2008 – Present-day, have a center bore of 2.8 inches (71.6mm) and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 100 lb-ft (135Nm) of wheel torque.

2012 – 2021

  • Journey with a 2.4i or 3.6i engine have a standard tire size of 225/65R17 or 225/55R19 and a rim size of 6.5Jx17 ET44 or 7Jx19 ET40.

2008 – 2011

  • Journey with a 2.4i engine have a standard tire size of 225/70R16 and a rim size of 6.5Jx16 ET44.
  • Journey with a 3.5i engine have a standard tire size of 225/65R17 and a rim size of 6.5Jx17 ET44.

Retightening The Bolts

As said before, all generations of the Journey that we discussed have five lug nuts. These need to be secured in a specific way when you mount the wheel to the car again. This information is stated in the owner’s manual, but we’ve gone through the effort of instructing you here. Dodge advises you to bolt these nuts in the way that’s shown below. You have to follow a crisscross pattern.

five lugs bolt pattern
five-bolt pattern

You do this by tightening all the nuts with a wheel wrench first. Please make sure only to tighten them halfway; otherwise, you’ll run into problems.

In the second round, you tighten them with the wheel wrench to the appropriate lbs-ft or Nm that we’ve stated earlier. Please note that the current generation of the Journey needs to have the bolt tightened to 100 lb-ft.

It’s expected that your wheel also have a center cap or cover. These need to be secured in the same pattern. Please tighten them first-hand snug with your hands. Then, use the wheel wrench to tighten them another one-quarter turn.

It’s also important to check if the lug nuts are still secured after 30 miles (48 kilometers). Please make sure they are all in place and still tightened with the proper force. If not, tighten them again and recheck. If this keeps happening, you’ll need to replace the wheel.

When Or Why To Rotate/Change Tires

Suppose you’re changing your tire. You also need to know when to change or rotate it precisely. Let’s first talk about changing your tires. Tires usually last around 60,000 – 75,000 miles or 4-5 years. After this period they need to be replaced. Sometimes this happens earlier, and therefore, it’s a good idea to keep an eye on the tread wear indicators. These are shown in the image below. These indicators show when the tires have only 1.6 mm (1/16 in) or less tread remaining.

image explaining thread indicators on a tire

Another occasion when you’ll need to take off your tires is when you’re rotating them. In the owner’s manual of the Journey, it’s said that this needs to happen every 7,500 miles or 12,000 kilometers. It’s advised you rotate the tires in the exact way that’s shown below. The front tires are moved to the back, and the front tires move crisscross to the front.

image explaining how to rotate tires


Have More Questions? Join Our Facebook Group!

Do you have any more questions that weren´t answered in this blog post? Join our free Facebook group and ask your question there. We promise you you´ll get an answer from one of our team members. Join the group here!