Skip to Content

The Exact Bolt Pattern Of An Acura MDX

We’ve written extensively about the Acura MDX and numerous questions you can have about this car. Today, we will talk about the information you need to have to select the correct new tires or rims for your MDX. Specifically, we’ll take a look at the bolt pattern for each generation. Let’s start with a quick answer:

Acura MDX manufactured between 2007 – 2013 and from 2017 onwards have a bolt pattern of 5×4.72 inches (5x120mm), a center bore of 2.52 inches (64.1mm), and five lug nuts with a thread size of M14 x 1.5 that need to be tightened with 93.6lb-ft (127Nm) of force.

Acura MDX manufactured between 2003 – 2006 and 2014 – 2016 have a bolt pattern of 5×4.5 inches (5×114.3mm), a center bore of 2.52 inches (64.1mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 80lb-ft (108Nm) of force.

However, that certainly doesn’t tell the whole story. Below we’ve outlined the bolt pattern in more detail for each generation. We also discuss what lugs/bolts are used precisely, the exact diameter of the center bore hub, and the torque specifications of the bolts. Finally, we also have information about each engine type’s exact tire size and rim size. You should know precisely what you can and cannot buy this way. Read on!

Also read: 11 Common Problems Of An Acura MDX 

Wheel Fitment Specifications Per Generation

To fit a wheel properly on your MDX, you’ll need to know more aspects than just the bolt pattern. Below we’ve outlined all the factors you should be aware of for each generation of the MDX. These include: center bore diameter, wheel tightening torque, whether lug nuts or bolts are used, and the thread size of the bolts.

We also want to clarify that the below-listed specifications are the same for all models within that generation. The MDX, of course, comes in different trim levels and engine options. However, these bolt patterns, lugs used, and torque specifications do not change for other models within a generation.

Furthermore, we also listed the exact tire and rim size used with each engine option to give you a precise idea of what tires you can and cannot buy.

2001-2006

  • Acura MDX with a 3.5i V6 engine has a standard tire size of 235/65R17 and a standard rim size of 6.5Jx17 ET45.

2007-2013

  • Acura MDX with a 3.7i V6 engine has a standard tire size of 255/55R18 or 255/50R19 and a standard rim size of 8Jx18 ET45 or 8.5Jx19 ET45.

Also read: How Well Does An Acura MDX Drive In The Snow? (Answered)

2014-2016

  • Acura MDX with a 3.5i V6 engine has a standard tire size of 245/60R18 or 245/55R19 and a standard rim size of 8Jx18 ET55 or 8Jx19 ET55.

2017-Present

  • Acura MDX with a 3.0H V6 engine has a standard tire size of 245/50R20 and a standard rim size of 8Jx20 ET55.
  • Acura MDX with a 3.5i V6 engine has a standard tire size of 245/60R18 and a standard rim size of 8Jx18 ET55.

Also read: The Types Of Gas An Acura MDX Takes (Explained)

Retightening The Bolts

As said before, most generations of the MDX that we discussed have five lug nuts. These need to be secured in a specific way when you mount the wheel to the car again. This information is stated in the owner’s manual, but we’ve gone through the effort of instructing you here. Acura advises you to bolt these nuts in the way that’s shown below. You have to follow a crisscross pattern.

This image has an empty alt attribute; its file name is image-38.png
five-bolt pattern

You do this by tightening all the nuts with a wheel wrench first. I like this wrench on Amazon in particular because it fits all bolt sizes for cars and trucks and is quite affordable. Please make sure only to tighten them halfway; otherwise, you’ll run into problems.

In the second round, you tighten them with the wheel wrench to the appropriate lbs-ft or Nm that we’ve stated earlier. Please note that the newest generation of the MDX needs to have the bolts tightened to 93.6 lb-ft.

It’s expected that your wheel also have a center cap or cover. These need to be secured in the same pattern. Please tighten them first-hand snug with your hands. Then, use the wheel wrench to tighten them another one-quarter turn.

It’s also important to check if the lug nuts are still secured after 30 miles (48 kilometers). Please make sure they are all in place and still tightened with the proper force. If not, tighten them again and recheck. If this keeps happening, you’ll need to replace the wheel.

Also read: The Exact Towing Capacity Of An Acura MDX (And More..)

When Or Why To Rotate/Change Tires

Suppose you’re changing your tire. You also need to know when to change or rotate it precisely. Let’s first talk about changing your tires. Tires usually last around 60,000 – 75,000 miles or 4-5 years. After this period they need to be replaced. Sometimes this happens earlier, and therefore, it’s a good idea to keep an eye on the tread wear indicators. These are shown in the image below. These indicators show when the tires have only 1.6 mm (1/16 in) or less tread remaining.

Also read: How Many Miles Can Acura MDX Last? (Answered)

This image has an empty alt attribute; its file name is image-40.png

Another occasion when you’ll need to take off your tires is when you’re rotating them. In the owner’s manual of the MDX, it’s said that this needs to happen every 7,500 miles or 12,000 kilometers. It’s advised you rotate the tires in the exact way that’s shown below. The front tires are moved to the back, and the front tires move crisscross to the front.

This image has an empty alt attribute; its file name is image-39.png

Sources